Filter
Top Products
16
RESETTING THE STOPWATCH & CLEARING
WORKOUT DATA
To reset the Stopwatch and clear workout data, press and hold the
RESET button for 3 sec, while in the Heart Rate/Stopwatch mode
and with the Stopwatch timer stopped. You will hear a second beep
and the stopwatch timer display will go to all zeros. This will allow
you to record a new workout starting from zero. Keep in mind that
the previous data will remain in the memory recall displays until it is
replaced with new data by restarting the stopwatch and recording
a new workout.
Note: The Stopwatch has a display capacity of 24hrs after
which it restarts its timer display at zero. If you do not clear the
memory before restarting the stopwatch, the stopwatch will
restart wherever you left off. It will allow you to stop and
restart as many times as you like, each time adding to the pre-
vious recording. To recall each workout’s results separately you
should reset the stopwatch before each workout.
1. From the Time mode, press the MODE button twice to go to
Recall mode. This display will show your Average Heart Rate and
Total Elapsed Time for your workout.
2. Press the LAP button to view the next recall items: Total Calories
& Time Spent In Your Target Zone for your workout.
3. Next, if you have recorded laps during your workout, each sub-
sequent press of the LAP button will display the last 8 laps saved
during your workout. Laps are displayed in descending order. After
all of the saved laps are displayed, the display will return back to the
first recall item.
Each lap recall display shows the "lap number" alternating with the
"elapsed time" in the upper left side of the display. The upper right
side shows your heart rate at the recorded lap and the lower display
shows the "lap time" for that lap.
USING THE MEMORY RECALL MODE