A SERVICE OF

logo

Chapter 2 Hardware Installation and Connections
IES-5106M / IES-5112M / IES-6000M User’s Guide
33
Figure 26 Loosening Splitter Chassis Card Thumbscrews
Figure 27 Removing a Splitter Chassis Card
2.4 IES-5106M/IES-5112M Card Connections
The following describes how to connect the line cards to the splitter chassis cards.
For the management switch card, refer to the card’s User’s Guide for instructions
on making the connections.
2.4.1 IES-5106M/IES-5112M 48-port Line Card Connections
Use a Telco-50 cable to connect the line card’s front panel Telco-50 connector to
the corresponding splitter card’s front panel Telco-50 connector. Make sure that
you use the appropriate length Telco-50 cables with the line cards; using cables of