Chapter 31 Link Layer Discovery Protocol (LLDP)
GS1920 Series User’s Guide
245
The following table describes the labels in Basic TLV part of the screen.
Table 112 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail
(Basic TLV)
LABEL DESCRIPTION
Basic TLV
Chassis ID TLV • Chassis ID Subtype - this displays how the chassis of the remote device is identified.
• Chassis ID - this displays the chassis ID of the remote device. The chassis ID is
identified by the chassis ID subtype
Port ID TLV • Port ID Subtype - this displays how the port of the remote device is identified.
• Port ID - this displays the port ID of the remote device. The port ID is identified by
the port ID subtype.
Time To Live
TLV
This displays the time-to-live (TTL) multiplier of LLDP frames. The device information on
the neighboring devices ages out and is discarded when its corresponding TTL expires.
The TTL value is to multiply the TTL multiplier by the LLDP frames transmitting interval.
Port
Description TLV
This displays the remote port description.
System Name
TLV
This displays the system name of the remote device.
System
Description TLV
This displays the system description of the remote device.
System
Capabilities
TLV
This displays whether the system capabilities are enabled and supported on the remote
device.
• System Capabilities Supported
• System Capabilities Enabled
Management
Address TLV
This displays the following management address parameters of the remote device.
• Management Address Subtype
• Management Address
• Interface Number Subtype
• Interface Number
• Object Identifier
