Chapter 30 Configuration: Management
GS1900 Series User’s Guide
193
Figure 174 Configuration > Management > Syslog > Remote > Add/Modify
The following table describes the labels in this screen.
30.3 SNMP
Simple Network Management Protocol (SNMP) is an application layer protocol used to manage and
monitor TCP/IP-based devices. SNMP is used to exchange management information between the
network management system (NMS) and a network element (NE). A manager station can manage
and monitor the Switch through the network via SNMP version 1 (SNMPv1), SNMP version 2c or
Table 170 Access Control Overview Console Port SSH Telnet FTP Web SNMP One session Share up to
nine sessions One session Up to five accounts No limit Chapter 42 Access Control 338 GS3700/
XGS3700 Series User’s Guide SNMP version 3. The next figure illustrates an SNMP management
operation. SNMP is only available if TCP/IP is configured.
30.3.1 The Global Screen
Use this screen to view the Global settings. Click Configuration > Management > SNMP to
open this screen.
Table 156 Configuration > Management > Syslog > Remote > Add/Modify
LABEL DESCRIPTION
Remote
Server Address Enter a server IP address or domain name.
Server Port Enter a server port number.
Severity Select the severity level of messages to be written to logs.
Facility Select the facility from the dropdown list.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
