Chapter 26 Configuration: LLDP
GS1900 Series User’s Guide
162
Figure 141 Configuration > LLDP > MED Network Policy > Add/Edit
The following table describes the labels in this screen.
Table 123 Configuration > LLDP > MED Network Policy > Edit
LABEL DESCRIPTION
MED Port Location Edit
No. Select the index of network policy
Application Select the Application type indicating the primary function of the application(s) defined for
this network policy, advertised by an Endpoint or Network Connectivity Device. The possible
application types are shown below.
1. Voice - for use by dedicated IP Telephony handsets and other similar appli-
ances supporting interactive voice services. These devices are typically
deployed on a separate VLAN for ease of deployment and enhanced security
by isolation from data applications.
2. Voice Signalling - for use in network topologies that require a different pol-
icy for the voice signalling than for the voice media.
3. Guest Voice - to support a separate limited feature-set voice service for
guest users and visitors with their own IP Telephony handsets and other sim-
ilar appliances supporting interactive voice services.
4. Guest Voice Signalling - for use in network topologies that require a differ-
ent policy for the guest voice signalling than for the guest voice media.
5. Softphone Voice - for use by softphone applications on typical data centric
devices, such as PCs or laptops.
6. Video Conferencing - for use by dedicated Video Conferencing equipment
and other similar appliances supporting real-time interactive video/audio ser-
vices.
7. Streaming Video - for use by broadcast or multicast based video content
distribution and other similar applications supporting streaming video ser-
vices that require specific network policy treatment. Video applications rely-
ing on TCP with buffering would not be an intended use of this application
type.
8. Video Signalling - for use in network topologies that require a separate pol-
icy for the video signalling than for the video media.
