![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/8d/28d5a323-00d5-4193-be4c-a4bf560c5e21/28d5a323-00d5-4193-be4c-a4bf560c5e21-bg113.png)
Electrical characteristics
275
LS9-16/32 Owner’s Manual
Appendices
All faders are nominal when measured. Output impedance of signal generator: 150 ohms
❏ Frequency Response Fs = 44.1kHz or 48kHz@20Hz–20kHz, referenced to the nominal output level @1kHz
❏ Gain Error Fs = 44.1kHz or 48kHz@1kHz
❏ Total Harmonic Distortion Fs = 44.1kHz or 48kHz
*Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz
❏ Hum & Noise Fs = 44.1kHz or 48kHz, EIN = Equivalent Input Noise
* Hum & Noise are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation.
❏ Dynamic Range Fs = 44.1kHz or 48kHz
* Dynamic range is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation.
Electrical characteristics
Input Output RL Conditions Min. Typ. Max. Unit
INPUT 1-16 <LS9-16>
INPUT 1-32 <LS9-32>
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω GAIN: max. -1.5 0.0 0.5
dB
PHONES OUT 8 Ω GAIN: max. -3.0 0.0 0.5
Input Output RL Conditions Min. Typ. Max. Unit
INPUT 1-16 <LS9-16>
INPUT 1-32 <LS9-32>
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω
Input level: -62dBu, GAIN: max. → Output level:
+4.0dBu (Typ.)
-2.0 0.0 2.0
dB
Input level: +10dBu, GAIN: min. → Output level:
+4.0dBu (Typ.)
-2.0 0.0 2.0
Internal Oscillator
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω Full scale output, Output level: +24.0dBu -0.5 0.0 0.5
PHONES OUT 8 Ω
-30dBFs, Phones level control: max. → Output
level: 0dBu (Typ.)
-0.5 0.0 0.5
Input Output RL Conditions Min. Typ. Max. Unit
INPUT 1-16 <LS9-16>
INPUT 1-32 <LS9-32>
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω
+4dBu@20Hz-20kHz, GAIN: max. 0.1
%
+4dBu@20Hz-20kHz, GAIN: min. 0.05
Internal Oscillator
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω Full scale output @1kHz 0.02
PHONES OUT 8 Ω
Full scale output @1kHz, Phones level control:
max.
0.2
Input Output RL Conditions Min. Typ. Max. Unit
INPUT 1-16 <LS9-16>
INPUT 1-32 <LS9-32>
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω
Rs=150Ω, GAIN: max.
Master fader: nominal, One channel fader: nom-
inal
-128
EIN
dBu
-62
Rs=150Ω, GAIN: min.
Master fader: nominal, One channel fader: nom-
inal
-84 -79
All Inputs <LS9-16> OMNI OUT 1-8 <LS9-16> 600 Ω
Rs=150Ω, GAINs: min.
Master fader: nominal, All channel faders: nomi-
nal
-67
All Inputs <LS9-32> OMNI OUT 1-16 <LS9-32> 600 Ω
Rs=150Ω, GAINs: min
Master fader: nominal, All channel faders: nomi-
nal
-64
—
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω Residual output noise, Stereo Master: off -86
— PHONES OUT 8 Ω Residual output noise, Phones level control: min. -86
Input Output RL Conditions Min. Typ. Max. Unit
INPUT 1-16 <LS9-16>
INPUT 1-32 <LS9-32>
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω AD + DA, GAIN: min. 108
dB
—
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
600 Ω DA Converter 110