32
Figure 5-2 Mirroring Port
The following entries are displayed on this screen.
¾ Mirroring Port
Mirroring Port: Select a port from the pull-down list as the mirroring port. When
disable is selected, the Port Mirror feature will be disabled.
¾ Mirrored Port
Port Select: Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select: Select the desired port as a mirrored port. It is multi-optional.
Port: Displays the port number.
Ingress: Select Enable/Disable the Ingress feature. When the Ingress is
enabled, the incoming packets received by the mirrored port will be
copied to the mirroring port.
Egress: Select Enable/Disable the Egress feature. When the Egress is
enabled, the outgoing packets sent by the mirrored port will be
copied to the mirroring port.
LAG: Displays the LAG number which the port belongs to. The LAG
member can not be selected as the mirrored port or mirroring port.
