A SERVICE OF

logo

4.28 LCD cable/Wireless LAN Antenna/Hinge 4 Replacement Procedures
3. Peel off the four acetate tapes fixing the wireless LAN antenna cable.
4. Peel off the three copper sheets and the gasket fixing the wireless LAN antenna.
5. Peel off both the wireless LAN antennas and pull out the cables through the hole
under the hinge cap.
A
cetate tape
Copper sheets
Gasket
Wireless LAN antenna
Figure 4-45 Removing the wireless LAN antenna
Satellite M30-35 Maintenance Manual (960-455) 4-71