A SERVICE OF

logo

4 Replacement Procedures 4.14 Touch Pad
Installing the Touch Pad
To install the touch pad, follow the steps below and refer to figures 4-21.
1. Connect the touch pad flexible cable to the connector on the touch pad.
2. Install the touch pad and secure it with the following screws.
M2.5×8B FLAT HEAD screw ×1
M2.5×4B FLAT HEAD screw ×1
3. Connect the touch pad flexible cable to the connector PJ3201 on the system board.
4-40 Satellite M30-35 Maintenance Manual (960-455)