24
NOTE: The playback speed will be displayed on the screen. However, when playing a recorded
video from a multiplexer, the playback speed only display on encoding (multiplexing)
mode. Press the
MUX / DVR button to switch between decoding and encoding
mode.
4.3.2 Slow Forward/Reverse
There are 4 speeds available for a slow playback: 1/2, 1/4, 1/8, 1/16. Follow the instructions below to
proceed with a slow playback.
While playing back recorded video at the recorded speed:
(1) Press the
PAUSE/STEP button for the slow playback mode.
(2) Forward: Press the
FWD button to view the recorded video in the forward direction at a
speed faster than the recorded speed. Each subsequent press of the FWD button slows
the rate.
(3) Reverse: Press the
REV button to view the recorded video in the reverse direction at a
speed faster than the recorded speed. Each subsequent press of the REV button slows
the rate.
(4) Normal: Press the
PLAY button to return to the normal speed of playback.
4.3.3 Play Back Picture-by-picture
While playing back recorded video at the recorded speed:
(1) Press the
PAUSE/STEP button for the picture-by-picture mode.
(2) Press the
PAUSE/STEP button to display one frame/field of a picture at a time in the
forward direction. (When playing back recorded video recorded by a multiplexer, each
sequential press of the
PAUSE/STEP button will display each camera in sequence.)
(3) Press the
PLAY button to return to the normal speed of playback.
NOTE: A flickering condition of an image occurs while playing back picture-by-picture, please
set the FLICKER REDUCTION option to ON in the SYSTEM page of the main menu.
However, when this function is activated, a slight loss of picture quality may occur.
