21
4.2.3 Alarm Recording
Take the following steps to activate the programmed alarm recording. For ALM REC RATE, ALM REC
QUALITY, ALARM STATUS, ALM DURATION, and PRE-ALARM settings, please refer to section 5.4
for more details.
(1) Press the SETUP button
to enter the MAIN MENU.
(2) Select ALARM and press the
ENTER
/
SAVE
ENTER/SAVE button to enter the ALARM SETTING.
(3) Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If pre-alarm
recording is required, set PRE-ALARM to ON.
(4) To activate the alarm recording, set ALARM OPERATION to ON. To deactivate it, set ALARM
OPERATION to OFF.
4.2.4 Externally triggered Recording
You can use an external switch to turn the recording function of the DVR on/off to record video into the
hard-disk drive by connecting the REC exposure contact on the rear panel of the DVR. Please refer to
section 2.3 for more details.
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
GO TO ALARM PAGE
ALARM SETTING
ALM OPERATION : OFF
REC RATE : 60F/S
REC QUALITY : HIGH
ALM TYPE : NO
ALM DURATION : NON STOP
PRE- ALARM : OFF
MAIN PAGE
ALARM REC ENABLE
