5 PROGRAMMING AND PRINTING REPORTS
1.
2.
3.
4.
● Speed Dial Code +
PreSS Function 6 0 Yes
lQUICK# H SPEED I
Press Speed Dial
SPEED# ¤~
KPAD N
Enter the code that you want to
program.
Example : Press O 0 .
Press No if you entered the wrong
code. Go to step 2.
[
I
Notes:
If SPEED # 00 Y/N/C and a
number is displayed, this code is
already programmed.
Either:
Erase the number – press
Clear Go to step 4.
Choose another code — press
No . Go to step 3.
Type in the number at the key-
pad.
Example: 2135557362
To correct a mistake:
– Press Clear to go back one space.
— Press No to clear the whole number.
5.
6.
7.
Note for PBX users:
If your machine is behind a PBX, you will
need to include the access code and a
pause before the number, if the number
is on an outside line.
Example: Access Code is 9 .
Press 9 Pause/Redial .
Then enter the number.
r
Notes:
1. For international numbers, you
must place a pause after the
country code. Use the Pause/
Redial key.
2. If you are going to use the num-
ber as a broadcaster or end re-
ceiver in a Transfer Request
operation at any time, you may
have to enter the international
dialing code, then a pause, then
the country and area codes, then
a pause, then the number. See
the bottom of page 54 for more
information.
To store the number, press
Yes .
SPEED# 00
Y, N
PROGRAM LABEL?
Program a label. See steps 8, 9,
and 10 on the previous page.
Either:
● To program another code or key, go back
to step 2.
● Press Function if you have finished
programming.
Print a Telephone List (Function 71) and
keep it near the machine.
