![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/09/f093c74c-88fd-40c1-a683-f457ca8c38c9/f093c74c-88fd-40c1-a683-f457ca8c38c9-bg44.png)
Customizing preferences
14
Chapter
68
En
• Color: Adjusts the color saturation.
• Hue: Adjusts the tone of color (red or
green is emphasized).
• Dimmer: Adjusts the brightness of the
display.
• Temperature: Adjusts the color temper-
ature, resulting in a better white balance.
❐ You can adjust “Hue” only when “Video
Signal Setting” is set to “NTSC”.
❐ With some rear view cameras, picture ad-
justment may not be possible.
6 Tap or to adjust the selected item.
Each time you tap or , the level of the se-
lected item increases or decreases.
■
If you want to switch the adjustment item,
tap or .
❐ “Brightness”, “Contrast”, “Color”, “Hue”
can be adjusted from “+24” to “–24”.
❐ “Dimmer” can be adjusted from “+1” to
“+48”.
❐ “Temperature” can be adjusted from “+3”
to “–3”.
❐ You cannot operate this function while driv-
ing.
❐ Different “Brightness”, “Contrast”,
“Dimmer” settings can be set for when the
illumination switch is on and when it is off.
❐ The same specifications are applied to all
sources (Home screen, Settings screen,
Radio, iPod music, Pandora) other than the
video source.
❐ The “Dimmer” setting is set to a common
setting in all sources.
Setting the clock mode
You can change the time format.
1 Display the “System” screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [Clock Mode].
Tapping [Clock Mode] changes the settings
as follows:
• 12H (default):
Changes the display to 12-hour format.
• 24H:
Changes the display to 24-hour format.
Selecting the background display
You can change the audio source screen
background and Home screen background.
1 Display the “System” screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [Background].
The background screen appears.
3 Tap the desired background display.
Restoring the default settings
Resets various settings registered to this prod-
uct and restores them to the default settings.
❐ “System Reset” can be set only when
the source is set to “OFF”.
1 Display the “System” screen.
Ü For details, refer to Customizing the
system settings on page 63.