Customizing preferences
14
Chapter
64
En
Setting the RCA output
This product’s preout (RCA rear output or
subwoofer output) can be used for a full-range
speaker (Full) or subwoofer (Subwoofer)
connection.
Initially, the product is set for a subwoofer
connection (Subwoofer).
❐ “Preout” can be set only when the source
is set to “OFF”.
1 Display the “System” screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [Preout].
Tapping [Preout] changes the settings as
follows:
• Subwoofer (default):
When a subwoofer is connected to the
RCA rear output, select “Subwoofer”.
• Full:
When no subwoofer is connected to the
RCA rear output, select “Full”.
❐ Even if you change this setting, there will
be no output unless you turn the subwoofer
output on.
Ü For details, refer to Using the subwoofer
output on page 61.
❐ If you change this setting, subwoofer
output in the audio menu will return to the
factory settings.
Selecting the system language
The system language can be selected from
three languages.
❐ If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
❐ Some characters may not be displayed
properly. Text that cannot be displayed is
displayed as “_” (underscore).
1 Display the “System” screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [System Language].
The “System Language” screen appears.
3 Tap the desired language.
English (default), Français, Español
