40672201TX Rev.4
4 - 52
4.8.2 Incoming Ringer
Bell signal is generated by software for several countries (Holland, Belgium, New Zealand
etc.) of INT'L version because ring circuit is not installed for the these countries.
Therefore, the machine must make a bell signal and generate the bell sound through a
speaker.
Function : Machine will decide to enable or disable this function using NCU
selfcheck function automatically.
2400 Hz/16 Hz bell sound is generated by detecting ring signal timing.
4.8.3 CML-ON timing
Function : To meet various countries requirements, CML-ON timing is selectable
from 100 ms to 1900 ms in 100 ms step.
Default : To meet various countries requirements.
4.8.4 Real time dialing
Function : Real time dialing condition is selectable to meet various countries require-
ments.
TYPE 1 : Real time dialing is available at OFF-HOOK.
TYPE 2 : Real time dialing is available at both OFF-HOOK and press HOOK key.
OFF : Real time dialing is not available.
Default : To meet various countries requirements.
4.8.5 Ring duration time
Function : To meet various countries requirements.
Ring duration time is selectable from 100 ms to 990 ms in 10 ms steps.
4.8.6 PC printer mode
Machine works as 300 DPI printer of PC and also works as Quasi-600 DPI (300 x 1200 DPI)
by using attached printer driver and application software which are provided by OKIDATA.
For details, please refer to appendix “MFP product specification”.
