40672201TX Rev.4
2 - 16
TYPE2 means ... The functions from #1 to #4 of upper TYPE2 are the same as
TYPE1.
If the FAX machine does not detect CNG signal during working
of TAD, the machine will go to standby mode.
TYPE3 means ... The functions from #1 to #2 of upper TYPE3 are the same as
TYPE1.
3. The fax machine does not detect CNG signal during 15
seconds from start of TAD operation.
4. The fax machine starts CNG signal detection after 15
seconds from start of TAD operation and shifts to receiving
mode after detecting CNG signal.
5. If the fax machine does not detect CNG signal during
working of TAD, the machine will go to standby mode.
52) FAX forwarding
This function is not available.
53) ANIS
This function is the operation in order to utilize specific service “ANIS”. This function is
available only for German area.
(In case of setting Country code to GER, AUT or SUI)
Machine's performance is as follows:
When operator enters hypen key, machine controls “FLASH process” for 250 msec.
54) Other functions
• Date and Clock adjustment
• Print out of machine configuration
• Telephone number lists registered as Local Code
• Telephone number list of One-touch keys
• TSI print
• Generate CNG signal
• Generate CED signal
• Echo protection for international TX/RX
• Parallel pick up (Switching by the external TEL)
• Distinctive ring detect
• Unique parameter (set to One-touch keys. e.g. Echo protection)
• Programmable parameter list (user dial-parameter setting)
• Power outage report
• Confidential reception
• Polling TX (Memory)
• Bulletin poll TX
• Restricted access
• Active memory files
• EXTRA FINE (15.4 lines/mm) reception capability
