Chapter3: OperatingYourVCR Recording(cont.)
Q Channel 2
0 Day Monday I?
(_ StarT. time II _Oam
l+3_m
AUTORecord speed
•tP_6 _iz__ __ e_d_I'_l_ _.
OChannel 2
0 Day Monday 17
<_Start time ll:30am
0 StoP time 1 : 3Dpm
-_,<-V-
0
0
The minute numbers of the stop time will flash. Press the
ADJUST buttons to set the minutes when you wish recording
to stop. Press the ENTER button.
Press the ADJUST buttons to set the recording speed (SP, EP,
or auto recording speed (AUTO)). (See "auto speed program-
ming" on page 44 for an explanation of the auto speed record-
ing feature.) Press the ENTER button.
CH DAY ON OFF
2 MOlT ll:30a I:30pSP
: : SP
: : SP
: : SP
{_Important:
@) The contents of the prosxammed memo_T will appear on the
"recap" screen.
O To program additional recording times, select an empty
program line by pressing the ADJUST buttons. Then, press
the ENTER button. You will return to the "Program to record"
screen. Continue the programming procedure from step _.
Only four of the eight program lines appear on-screen at any one
time. To see additional program lines, press the ADJUST buttons
to scroll the lines on the screen.
@
When you are finished with all programming, turn t]he VCR
power OFF and make sure the programmed recording light is
lit. However, if you have a cable box, ][eave it turned ON and
tuned to the station you wish to record. Additionally, if you
are using an A/B switch, remember to s_t the switch to the
correct position.
cancellinga recordingin progress
There are two ways to cancel a recording in progress:
1. Press the PLAY/STOP button. The reco::ding is stopped, but
the program is not cancelled. Therefore: if you press REC, the
recording will start again.
2. Press the POWER button on the front panel. The recording is
stopped and the program is cancelled.
changingsettingswhileprogramming
If you wish to change one of your settings (such as start Lime)
while you are programming, press the ENTER and CANCEL
button on the remote to select the setting you wish to change.
ENTER will move you forward through the list, while CANCEL
38
