Your choices are:
OSe_ the clock
Add/delete channels
'3_MENU to 9o back:
® q_--ENTER to en%er
0
0
Make sure the words "First Time Set-Up" is highhght_._d. If it
is not, use the ADJUST buttons to highlighted it. Press the
ENTER button.
The "First Time Set-Up" menu appears on your screen. Press
the ADJUST buttons to select "Memorize channels". Press the
ENTER button.
_>Important:
Nhat _ype of sources are
connected to _he VCR?
Indoor/outdoor an_.
_1M6ni6r'i z6 € hann e_ls :=
Now memorizin9 all %he
s_azions you can receive
Channel 3
SZand by Zhis may lake
a fe_ minu_es
_Important:
Your choices are:
_Prosram _o record
_lllJl (.--11_,[e] ii | Q.'.,(_ q _7[.) |*I;
FirsZ Time Se%-Up
If you are recording, playing back a tape or receiving a video
signal from an external input, the words "No_ available" will flash
and an error message will appear. To correct this, stop the tape or
switch the VCR's input to tuner.
O
You will see the menu for automatically memorizing chan-
nels. Using the list below as a reference, press the ADJUST
buttons to select the kind of antenna you connected.
• If you are using any cable combinatio_l, including a cable
box with an A/B switch, choose "Cable".
• If you are using an antenna that receives only over-the-air
broadcasts, such as "rabbit ears" or a _oof-mounted an-
tenna, choose "Indoor/outdoor ant".
After you have selected, press the ENTEL_ button.
O
You will see an on-screen message and the display on the
front of your VCR will show you that the VCR is memorizing
the stations you can receive. You can cancel the memorization
at any time by pressing CANCEL on the remote control.
After the VCR has programmed all the channels, the screen will
return the VCR's picture.
Automatic programming may include vacant channels if there are
stray signals or noise on those channels. If this occurs, you can
manually delete the channels using the procedure in the section
"Adding and deleting channels."
Usingvideo mute
When you turn video mute ON, any blank section of tape, or any
station with a weak signal, _ill be replaced by a blue screen. The
sound will also be turned off. If there is a time when you would
like to try to tune in a weak station, turn vSdeo mute OFF.
Beforeyoubegin,youshouldknowhow:
• to view the picture coming from your VCR; (see page 22)
• to use the menus. (See page 26.)
O Press the MENU button on the remote control. The "VCR
Main Menu" appears on your TV.
Use the ADJUST button,; on the remote _o select "Customize
choices". Press the ENTI_IR button.
27
