A SERVICE OF

logo

Step 4: Replace Test Strip
Holder
1. Hook the bottom of the
Test Strip Holder onto the
square notch on the Meter.
2. Place each thumb on the
raised dots and push down
on top of the Holder until it
snaps firmly into place. You
are now ready to do a Check
Strip test. If the Check Strip
will not slide into the Test
Strip Holder, repeat this
procedure.
PAS D'ALCOOL
46
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 46 (1,1)