Item Description Default
Frequency Press the cursor left/right button to adjust the A/D
sampling clock.
Frequency is only active when the input source is
Analog RGB.
Range: 0 to 100
Auto detected
Tracking Press the cursor left/right button to adjust the A/D
sampling number.
Tracking is only active when the input source is
Analog RGB.
Range: 0 to 100
Auto detected
Cancel Resets Video Type, Video AGC, and Projection to
default values.
N/A
Information menu
Follow the steps below to access the Information menu.
1. Press the Menu button to open the OSD menu.
2. Press the cursor left/right button to move to the Information menu.
3. Press the cursor up/down button to move up and down in the Information
menu.
The following table shows the options that you will see in the Information menu
and a brief description.
Item Description
Video Information Displays the resolution and refresh rate of
the connected video device.
Active Source Information about active source
Software Version Information about software revisions.
5-8 E500 Projector: User’s Guide
