Konica Minolta C650 Manual

A SERVICE OF

next previous

C650 1-13

Before use

1

Before use Chapter 1

Placing the document on the original glass

1

Lift open the ADF.

– When placing the document on the original glass, be sure to lift open the

ADF at least 20°. If the document is placed on the original glass without

the ADF being lifted at least 20°, the correct document size will not be

detected.

2

Place the original on the original glass with the side to be scanned

faces down.

– Load the original pages so that the top of the original is toward the back

or the left side of the machine.

3

Align the document with the mark in the back-left corner of the

document scales.

4

Close the ADF.

When loaded in the

v

orientation: When loaded in the

w

orientation:

20°20°

Document scales