Multi-Media Unit: Installation Instructions
3–14
Auto-synch statistics
Last Synchronized at. Latest time that the SNTP server was used.
Period. Time amount between synchronizations. A dynamic value, that keeps the unit’s
clock 0.4 to 0.2 seconds of the server's.
Time Difference. Accuracy of synchronization.
Auto-synch statistics do not apply to a clock set to Manual.
Clock: Manual setting
A Multi SA can synchronize the clock of a Rapid Eye Multi-Media unit using a PC’s clock
as reference. This is more useful for units connected only by dial-up, but can also be
used for units on a LAN.
!42 To set a unit’s clock manually, using a PC’s
1. Check the accuracy of the time and the time zone on the PC and adjust it as
needed. To adjust a PC’s time, date and time zone, click Start followed by
Settings, Control Panel and Date/Time.
2. Using View software, select a Multi or Multi-Media unit whose clock needs to be
set.
3. Start a maintenance session.
4. Click the Time tab. If Manual is not selected, click it. The Time tab appears as in
figure 34.
5. Click Set Multi-Media unit’s Clock. Please wait until the “Synchronized Time”
message appears.
