Multi-Media Unit: Installation Instructions
2–2
Table 1
contents of Rapid Eye’s hardware kit, WAMULTI5HWP4
item, one of each, unless otherwise noted Part #
power cord P8137
rack ears, brackets and screws, for optional mounting of unit SARE2EARS
network cable (CAT-5), RJ45 connectors, 2m length K9530
null-modem cable, serial, DB9 connectors, female 921400–05
straight through cable, DB9-pin, male connector, to
DB9-pin, female connector
K0304
terminal block plug for FAULT RELAY, 4 positions, 3.5mm K9531-4
terminal, block plugs (six), for ALARM inputs and CONTROL outputs,
8 positions, 3.5mm
K9531-8
screwdriver, slim, for terminal blocks K9536
printed matter
Please Read This First!
K9700
this document: Multi-Media Unit Installation Instructions
K9696
Table 2
contents of Rapid Eye’s software kit, WAMULTI5SWP4
Item, one of each, unless otherwise noted Part #
mouse, two-button, PS/2 compatible K9258
mouse pad K0007V1
CD, Rapid Eye Multi-Media software HRM6ADMIN
printed matter
Operator Software Setup Instructions
K5401
Admin User Guide
K5403
View User Guide
K5404
2.1.1 Rear Panel Reference
Fig. 13. Rear panel of a Multi-Media unit. The connectors are listed in table 3.
