Document K14392V1 Rev A 221
07/07
12
Touring Many Sites
Purpose
A Rapid Eye Multi system can be set to show all of the video and data from a series of sites, one
site at a time, automatically. This a common use of a CCTV security system. Admin is used to
setup one or more tours. View is used to run site tours.
See also
A site tour, involving many Rapid Eye sites is very different from other types of tours, such as:
• PTZ tour. One camera; one site. See
Pan, Tilt, and Zoom (PTZ) Setup to see how to set a PTZ-
camera to a preset position.
• LocalView tour. Using LocalView to tour many cameras at one site. See the LocalView online
help.
• Public display monitor. Many cameras at one site. Using a monitor connected to one Multi-
Media unit. See
Public Display Monitor: Using Monitor Output 1, p. 141.
Preliminary Checklist
Before defining a site tour
Your Multi System Administrator (Multi SA) needs at least two sites to define a tour. See
Naming /
Renaming a Site, on p.
24. For systems using one site only, a Live session is as effective as a Site
tour. See the
Rapid Eye View Software Operator Guide.
Tip
A site tour is not listed in View until more than one site is assigned to it.
Design a site tour using two or more Rapid Eye units.
System password
The
System Password should be the same for the Rapid Eye sites selected for a site tour.
See p.
166.
