A SERVICE OF

logo

Repair / 修理
48 313483A
English
5. Install six screws (38). Torque
evenly to 200 ± 10 in-lb (22.6 ±
1.1 N•m).
6. Install Pump, page 70.
NOTICE
DO NOT use drive housing screws
to align or seat drive housing with
pinion housing. Align these parts
with locating pins to avoid premature
bearing wear.
中文
5. 装上六个螺钉 (38)。
用 200 ± 10 磅英寸
(22.6 ± 1.1 N•m
的扭力均匀拧紧。
6. 安装,第 70 页。
注意
不要用驱动室螺钉去将驱动室与小齿
轮护罩对准或对位。要用定位销来对
准这些部件,以免轴承过早磨损。
ti13712a
38