A SERVICE OF

logo

Operation / 操作
20 313483A
English
Spray Without Air
1. Install filter and tip
extension.
2. Insert metal seat and
OneSeal. Insert
Switch Tip. Screw
assembly onto appli-
cator.
3. Turn drain valve to
SPRAY, and turn
on/off switch to ON.
Tur n pump control
clockwise until
desired material deliv-
ery rate is achieved.
4. Spray test pattern.
Aim applicator at floor.
Turn applicator switch
ON and move appli-
cator to spray surface.
中文
无空气喷涂
1. 装上过滤器和喷嘴加
长件。
2. 插入金属座和
OneSeal。插入
SwitchTip 喷嘴。
将组装件旋到喷
涂器上。
3. 将泄压阀旋转至喷涂
位置,然后接通通 /
断开关。顺时针旋转
泵控制器,直至达到
所需的涂料输送速度。
4. 喷涂试验喷型。将喷
涂器对准地面。接通
喷涂器开关并移动喷
涂器以喷涂表面。
ti13648a
ti13650a
ti8794a
ti13651a