A SERVICE OF

logo

Repair / 修理
313483A 47
Installation / 安装
English
1. Apply all grease sup-
plied with replacement
gear cluster to gear
teeth and mating sur-
faces.
2. Ensure thrust washers
(30, 31) are on combi-
nation gear (32) and
washers (33a, 33b) are
on crankshaft of drive
housing (33).
3. Clean mating surfaces
of pinion and drive
housing.
4. Align gears and push
new drive housing
straight onto pinion
housing (29) and locat-
ing pins (B).
中文
1. 把随替换齿轮组提供的
所有润滑脂涂在齿轮齿
和对接表面上。
2. 确保止推垫圈 (30,
31)在联合齿轮 (32)
上,而垫圈 (33a,
33b)在驱动室 (33)
的曲轴上。
3. 清洁小齿轮与驱动室的
对接表面。
4. 对准齿轮,将新驱动
室直接推到小齿轮护
(29)和定位销
(B)上。
ti6252a
32
30
30
31
ti13840a
29
33b
33a