EPSON PowerLite 8300i Projector
5/03 EPSON PowerLite 8300i Projector - 9
Using Keystone Correction
To adjust your image when the right and left sides are uneven,
do one of the following:
❏ Use the
Keystone buttons on the projector’s control panel
to adjust the image shape.
❏ Or use the Keystone function in the
projector’s menu system. (Press the
Menu
button on the remote control, select the
Setting menu, and press Enter. From the
Setting menu, select
Keystone and press
Enter. Then select V-Keystone and press
Enter. Adjust the setting as needed.)
Note: After using Keystone correction, the image will be slightly
shorter. If it’s important to maintain the correct aspect ratio, you
can stretch the image to its proper size using the
Height setting in
the Keystone menu.
Using Quick Corner
Use Quick Corner to correct the image shape when it’s
uneven on the top and bottom, or on all sides.
1. Press the
Menu button on the remote control (or on the
projector’s control panel).
2. Select the
Setting menu and press Enter.
3. From the Setting menu, select
Keystone and press Enter.
4. Select
Quick Corner and press Enter.
You see this screen:
5. Press the
Enter button to select the corner you want to
adjust.
6. Use the pointer button on the remote control (or the
arrow buttons on the projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed to adjust any remaining
corners.
8. When done, press
ESC to exit the menu system.
Correcting Computer Images
If you’ve connected a computer and the image doesn’t look
right or fit properly on the screen, press the
Auto button on
the remote control (or the
Auto/Enter button on the
projector’s control panel). This automatically resets the
projector’s tracking, sync, resolution, and position settings.
Note: You must be projecting an image for this button to have
any effect. The
Auto button works only with computer images.
Keystone buttons
Menu button
Auto button
