Connecting the projector to a computer - 21
● When the monitor port is the 5BNC
Point
· Do not bind the power cable and the computer cable together. Failure to observe this may
result in malfunctions.
· An adapter may be required when making the connection depending on the shape of the
computer’s port. Refer to the computer instruction manual for further details.
· There are cases where the optional Mac desktop adapter and Mac monitor adapter are
required when connecting up to a Macintosh.
· It is possible to establish connections with both the Computer 1 port and the Computer 2
port when two computers are to be connected.
● When the monitor port is 13w3
The Computer 1 port is also connected to the mini D-Sub 15 port with the use of the conversion
cable when the 13w3 port is used for connecting the computer’s monitor port to a work station.
· The projector’s computer 1-mini D-Sub 15 port is connected to the computer’s monitor port
(13w3) with the 13w3 ↔ mini D-Sub 15 cable (available on the open market).
· Set the switch to the analog setting (right-hand side) with the tip of a ballpoint pen or other
pointed object.
Computer 1-mini D-Sub15 port
Computer cable
(supplied with the projector)
Monitor port
(video port)
Monitor port
Computer 1-mini D-Sub15 port
13w3 cable
(available on the open market)
