36
Adjusting the Image Quality
If vertical stripes appear in the projected images,
and this cannot be fixed using automatic setup,
you will need to adjust the tracking manually
using the following procedure.
PROCEDURE
Press the [Menu] button on the remote control, and then
select "Tracking" from the "Video" menu.
For details on this operation, refer to "Using the Configuration
Menus".
p.57
Press the [ ] and [ ] buttons to set the tracking value
to a value that causes the vertical stripes to
disappear from the image.
The tracking value increases or decreases each time a button is
pressed.
After making the adjustment, press the [Menu] button
to exit the configuration menu.
Adjusting the Tracking
1
Color Mode
Video
Audio
Setting
User's Logo
Advanced
About
Position
Adjust
Tracking
0000
Sync . 0
Brightness 0
Contrast
Sharpness 0
Reset All
+
-
+
-
0
+
-
:
:
:
:
:
[Normal ]
[ESC]: Return [ ]: Select [ ]: Adjust [Menu]: Exit
Select
:
:
Input Signal
Auto Setup
Reset
Execute
ON OFF
:
Select
[Computer
]
:
2
+
-
+
-
+
-
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Color Mode
Position
Tracking
Sync .
Brightness
Contrast
Sharpness
:
:
:
:
:
Select [Normal ]
0
0
0
0
1000
Adjust
[ESC]: Return [ ]: Select [ ]: Adjust [Menu]: Exit
Select
Input Signal
Auto Setup
Reset
:
:
Execute
ON OFF
[Computer
]
3
TIP
The image will flash when continuous tracking adjustment is carried
out, but this is normal.
