A SERVICE OF

logo

If your network assigns addresses automatically, set the DHCP
setting to On.
If you must set addresses manually, set the DHCP setting to Off
and enter the projector's IP Address, Subnet Mask, and Gateway
Address as necessary.
a
To highlight the numbers you want from the displayed
keyboard, press the arrow buttons on the remote control. To
select a highlighted number, press [Enter].
i
To prevent the IP address from being displayed on the standby
screen, set the IP Address Display setting to Off.
j
When you finish selecting settings, select Complete and follow the
on-screen instructions to save your settings and exit the menus.
Related Links
"Wired Network Projection" p.99
Wired Network Projection
101