Departmental Switch Model DS-16B Hardware Reference Manual
Switch Management
Gateway Address Pressing <Enter> while Gateway address is selected, displays:
The default gateway address is shown above. You must enter a valid
gateway address, if required.
To enter the gateway address
1. Use <Up> and <Down> to increment or decrement the displayed
value. The underlined cursor indicates the numbers to modify.
2. After entering a number, press <Tab/Esc> to move the cursor to
modify the next field.
3. After setting the gateway address, pressing <Enter> stores the
value.
Domain Pressing <Enter> while
Domain is selected, displays:
The domain number uniquely identifies the switch in a Fabric. This
switch ID is normally automatically assigned by the switch and may
be any value between 1 and 239. If VC-Encoded Address Mode is in
effect, then the values are between 0 and 31. You may also assign this
number manually.
BB_credit Pressing <Enter> while
BB_credit is selected, displays:
The number represents the number of buffers, from 1 to 16, available
to the host. For a complete description of buffer-to-buffer credit, refer
to the industry specification Fibre Channel Physical and Signalling
Interface (FC-PH).
Gateway address:
0.
0. 0. 0
Domain:
0
BB_credit:
16
