4-23
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 4 Configuring CTMS Administration Software
System Settings
• To register new or modified settings, click Apply.
• To restore the original settings, click Reset.
Editing Access Settings
Figure 4-2 shows the Access Settings screen.
Table 4-1 IP Settings
Field or Button Setting
MAC Address (View only) MAC address of the MCU device on which the Cisco
TelePresence Multipoint Switch is located.
Hostname (View only) Hostname configured for the MCU device on which the
Cisco TelePresence Multipoint Switch is located.
Domain Name (View only) Domain name in which the MCU device on which the
Cisco TelePresence Multipoint Switch is located.
Primary DNS (View only) IP address of the primary DNS for the MCU device on
which the Cisco TelePresence Multipoint Switch is located.
Secondary DNS (View only) IP address of the secondary DNS for the MCU device on
which the Cisco TelePresence Multipoint Switch is located.
Ethernet Card (View only) Ethernet card being used on the MCU server to connect
to the network.
IP Address IP address of the Cisco TelePresence Multipoint Switch.
Note After changing the IP address, close your browser window,
then log into CTMS again using your new IP address.
Subnet Mask Subnet mask of the Cisco TelePresence Multipoint Switch.
Default Gateway Default gateway IP address for the Cisco TelePresence Multipoint
Switch.
