Chapter 5: Local Management
5-32 2M46-04R/2M46-04RDC User’s Guide
5.9 SNMP TRAPS SCREEN
Since the 2M46-04R is an SNMP compliant device, it can send messages
to multiple Network Management Stations to alert users of status
changes. The SNMP Traps screen is shown in Figure 5-14.
To access the SNMP Traps screen from the Device Configuration Menu
screen, use the arrow keys to highlight the SNMP TRAPS menu item and
press ENTER. The SNMP Traps screen displays.
Figure 5-14 SNMP Traps Screen
The following explains each field of the SNMP Traps screen:
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
Trap Community Name (Modifiable)
Displays the community name included in the trap message sent to the
Network Management Station with the associated IP address.
Enable Traps (Toggle)
Enables transmission of the traps to the network management station with
the associated IP address. This field toggles between YES and NO.
Firmware Revision: XX.XX.XX
SNMP Traps
2314-17
Device Type: 2M46-04R
BOOTPROM Revision: XX.XX.XX
Trap Community Name
public
public
public
public
public
public
public
public
2M46-04R LOCAL MANAGEMENT
Event Message Line
RETURNSAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
EXIT
