Chapter 5: Local Management
5-74 2M46-04R/2M46-04RDC User’s Guide
bridge:
Syntax: bridge [enable/disable] [ifnum/all]
Description: The bridge command allows bridge
management to be enabled or disabled at the
user’s request, either one at a time or all at once.
Specifying a single interface number will affect
the bridging status of that interface, while
specifying
all will affect every interface.
Options: Not Applicable
Example:
defroute:
Syntax: defroute [interface number] [IP address]
defroute delete [interface number] [IP address]
Description: The defroute command allows the user, in the
syntax order shown above, to view, set, or
delete the default IP route to a managed device
through the specified interface.
Options: Not Applicable
Example:
-> bridge disable all
-> bridge enable 1
051468
-> bridge disable 1
-> defroute 2 147.152.42.32
#Default route is 147.152.42.32 on interface 2
->defroute
#Default route is 147.152.42.32 on interface 2
->defroute delete
#Default route is not currently set.
051469
