15
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Stopping SCAN
To stop scanning,
➮ briefly press the 2 (SCAN) button
9 again.
The currently scanned track will then
continue to be played normally.
Note:
● You can set the scanning time
(scantime). For further details, read
the section entitled “Setting the
scantime” in the “CD mode”
chapter.
Pausing playback (PAUSE)
➮ Press button 1 ( ) 9.
“S--PAUSE” appears in the display.
Canceling pause
➮ Press button 2 ( ) 9 while in
pause mode.
Playback is resumed.
CLOCK - Time
Displaying the time
To display the time,
➮ briefly press the button ;.
Setting the clock
➮ Press the MENU button 5.
➮ Keep pressing the or button
5 until “CLOCKSET” appears in
the display.
➮ Press the button 5.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮ Adjust the minutes using the /
buttons 5.
Once the minutes are set,
➮ press the button 5.
The hours flash on and off.
➮ Adjust the hours using the /
buttons 5.
When you have finished making your
changes,
➮ press the MENU button 5 twice.
Selecting 12/24-hour clock
mode
➮ Press the MENU button 5.
➮ Keep pressing the or button
5 until “24 H MODE” or “12 H
MODE” appears in the display.
➮ Press the or button 5 to
switch between the modes.
CD CHANGER MODE
CLOCK - TIME
