81
To upgrade the firmware for the Router, you need to download the firmware file to your local hard
disk, and click on Browse to select it, then click Upload to start the upgrade process. (You may
have to wait a few minutes for the upgrade to complete).
3.6.5 System Settings
The System Settings screen allows you to save (Backup) the router’s current configuration
setting. Saving the configuration settings provides an added protection and convenience should
problems occur with the router and you have to reset to factory default. When you save the
configuration settings (Backup) you can re-load the saved settings into the router through the
Restore function. If extreme problems occur you can use the Restore Settings to Default
selection, this will set all configurations to its original default settings (e.g. when you first
purchased the router).
Parameters Description
Save Settings to File Click Save button to save the Broadband router current
configuration to a file named "config.bin" on your PC.
Load Settings from File Click Browse button to search the file you have saved before and
click Upload button to restore the saved configuration to the
Broadband router.
Restore Settings to Default Click Reset button if you want to force the Broadband router to
perform a power reset and restore the original factory settings.
