display security acl map 373
Examples — To display the contents of all security ACLs committed on a
WX switch, type the following command:
WX4400# display security acl info all
ACL information for all
set security acl ip acl_123 (hits #5 462)
---------------------------------------------------------
1. permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 192.168.2.11 0.0.0.0 destination IP any
set security acl ip acl_134 (hits #3 0)
---------------------------------------------------------
1. permit IP source IP 192.168.0.1 0.0.0.0 destination IP any enable-hits
set security acl ip acl_135 (hits #2 0)
---------------------------------------------------------
1. deny IP source IP 192.168.1.1 0.0.0.0 destination IP any enable-hits
The following command displays the contents of acl_123 in the edit
buffer, including the committed ACE rules 1 and 2 and the uncommitted
rule 3:
WX4400# display security acl info acl_123 editbuffer
ACL edit-buffer information for acl_123
set security acl ip acl_123 (ACEs 3, add 3, del 0, modified 0)
---------------------------------------------------------
1. permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 192.168.2.11 0.0.0.0 destination IP any
3. deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits
See Also
■ “clear security acl” on page 366
■ “commit security acl” on page 369
■ “set security acl” on page 380
display security acl
map
Displays the VLANs, ports, and virtual ports on the WX switch to which a
security ACL is assigned.
Syntax —
display security acl map acl-name
■ acl-name — Name of an existing security ACL for which to show
static mapping. ACL names must start with a letter and are
case-insensitive.
Defaults — None.
