set service-profile rsn-ie 305
History — Introduced in MSS Version 3.0.
Usage — MSS converts the hexadecimal number into a 256-bit binary
number for system use. MSS also stores the hexadecimal key in the WX
switch's configuration. The binary number is never displayed in the
configuration.
To use PSK authentication, you must enable it and you also must enable
the WPA IE.
Examples — The following command configures service profile sp3 to
use a raw PSK with PSK clients:
WX4400# set service-profile sp3 psk-raw c25d3fe4483e867
d1df96eaacdf8b02451fa0836162e758100f5f6b87965e59d
success: change accepted.
See Also
■ “set mac-user attr” on page 207
■ “set service-profile auth-psk” on page 298
■ “set service-profile psk-phrase” on page 303
■ “set service-profile wpa-ie” on page 312
set service-profile
rsn-ie
Enables the Robust Security Network (RSN) Information Element (IE). The
RSN IE advertises the RSN authentication methods and cipher suites
supported by radios in the radio profile mapped to the service profile.
Syntax —
set service-profile name rsn-ie {enable | disable}
■ name — Service profile name.
■ enable — Enables the RSN IE.
■ disable — Disables the RSN IE.
Defaults — The RSN IE is disabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
