Filter
Top Products
10. Lower the Uprights (31, 36).
S
ee the inset drawing. Position the Uprights (31,
36) so that the treadmill Frame (74) is centered
b
etween the Uprights.
See steps 2–6. Firmly tighten the Upright Bolts
(27) and the Frame Bolts (32) on each side of
the treadmill. Do not overtighten the Frame
Bolts.
36
3
1, 36
32
74
74
31
View from Above
Side View
1
0
27
11. Raise the Uprights (31, 36).
Rotate the Left and Right Base Covers (90, 91)
180 degrees. Slide the Base Covers over the
Base (48). If necessary, pull out on the sides of
the Base Covers to fit them over the Wheel Bolts
(14).
90, 91
48
11
31, 36
14
10