Filter
Top Products
11
9. Attach the two Console Clamps (83) to the con-
sole assembly with four #8 x 1" Screws (7).
7
7
9
83
83
Console
Assembly
8
8. Insert the wires into the Right Handrail (64)
through the indicated hole as you set the con-
sole assembly on the Left and Right Handrails
(59, 64). Make sure that no wires are pinched.
Attach the console assembly with four #8 x 3/4"
Screws (4). Start all four Screws, and then
tighten them. Do not overtighten the Screws.
See assembly step 4. Firmly tighten the six 3/8"
x 3 1/4" Screws (2) on the lower ends of the Left
and Right Uprights (66, 76) (only one side is
shown).
76
66
4
4
59
Wires
Hole
Console Assembly
Ground
Wires
64