Filter
Top Products
1. With the help of a second person, carefully raise the
Uprights (11) until the treadmill is in the position shown.
Cut the tie from the right Upright (11).
11
Tie
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver , adjustable wrench , and wire
cutters .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
5
2. Insert one of the Extension Legs (34) into the treadmill
as shown. (Note: It may be helpful to tip the Uprights
[11] in the direction shown by the arrow as you insert
the Extension Leg.) Make sure that the Base Pad (40) is
on the indicated side of the Extension Leg. Attach the
Extension Leg with an Extension Leg Screw (53). Make
sure to push on the head of the Extension Leg
Screw while tightening it.
Attach the other Extension Leg (not shown) in the same
way.
53
11
2
1
34
40
Extension Leg
Screw (53)–2
Screw (96)–6
Handrail Washer (92)–2
Handrail Nut (93)–2
Short Handrail Bolt (89)–2
Washer (39)–2
Handrail Bolt (91)–2