Filter
Top Products
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dis-
pose of the packing materials until assembly is completed. In addition to the included allen wrench, assembly
requires a phillips screwdriver, (_========_ an adjustable wrench _-__ and scissors _.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a nor-
mal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply
wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Handrail Bolt (1)-4
Handrail Washer (80)-4
Latch Screw (14)-2
Weight Rack Screw (13)-12
D
Extension Leg
Screw (39)-2
Console Screw (3)-4
Handrail Star
Washer (2)-4
1. With the help of a second person, raise the Uprights (38)
to the position shown. During this step 1 and step 2,
be careful not to pull on or damage the Wire Harness
(53) in the right Handrail (4).
Insert one of the Base Legs (44) into the right Upright
(38), with the Base Leg Pad (33) in the indicated posi-
tion. Using the included Allen Wrench (81), attach the
Base Leg with a Base Leg Screw (39). Attach the other
Base Leg (not shown) to the left Upright in the same
way. Note: A replacement Base Leg Pad (33) may be
included. If a Base Leg Pad becomes worn and needs to
be replaced, use the replacement Base Leg Pad.
33
81
2. Hold a Handrail (4) against the left Upright (38) as
shown. Thread two Handrail Bolts (1), with two Handrail
Washers (80) and two Handrail Star Washers (2), into
the left Upright and the Left Handrail. Do not tighten
the Handrail Bolts yet.
Hold the other Handrail (4) close to right Upright and
insert as much Wire Harness (53) as possible into the
Upright. Attach the right Handrail (4) to the right Upright
(38) with two Handrail Bolts (1), two Handrail Washers
(80), and two Handrail Star Washers (2). Do not tighten
the Handrail Bolts yet. Be careful not to pinch the
Wire Harness (53). Remove the tie from the Wire
Harness and the right Handrail.
38
53