Filter
Top Products
12
HOW TO USE A PRESET WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
2. Select a preset workout.
To select a preset workout, press the Program but-
ton repeatedly until the desired workout appears in
the display. Note: The name and profile of each
workout is listed on the console.
Press the Speed increase and decrease buttons to
adjust the duration of the workout.
3. Start the walking belt.
Press the Start button to start the workout. A mo-
ment after you press the button, the treadmill will
automatically adjust to the first speed setting of the
workout. Hold the handrails and begin walking.
Each workout is divided into segments. One speed
setting is programmed for each segment. Note:
The same speed setting may be programmed for
consecutive segments.
Tones will sound at the end of each segment. The
treadmill will then automatically adjust to the speed
setting for the next segment.
The workout will continue in this way until the last
segment ends. The walking belt will then slow to a
stop.
If the speed setting is too high or too low at any
t
ime during the workout, you can manually override
the setting by pressing the Speed buttons; how-
ever, when the next segment of the workout be-
gins, the treadmill will automatically adjust to
the speed setting for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move. When the
next segment of the workout begins, the treadmill
will automatically adjust to the speed setting for the
next segment.
4. Follow your progress with the display.
See step 4 on page 11.
5. Measure your heart rate if desired.
See step 5 on page 11.
6. When you are finished exercising, remove the
key from the console.
See step 6 on page 11.