Filter
Top Products
10
INCLINE ADJUSTMENT
T
he incline of the treadmill can be adjusted to two
positions. Hold the front of the Frame (29), and
r
emove the two Adjustment Pins (4). Raise or lower
the Frame, align the holes in the Frame with one of
the sets of holes in the Uprights (35, 36), and then
reinsert the Adjustment Pins.
LUBRICATING THE WALKING PLATFORM
B
efore the treadmill is used, the walking platform
should be lubricated. Open the included lubricant
p
acket. Reach under one side of the walking belt as
far as you can, and apply half of the lubricant to the
walking platform. Then, reach under the other side of
the walking belt and apply the remaining lubricant.
A
fter you have applied the lubricant, walk on the
treadmill for a few minutes to spread the lubricant.
CAUTION: Make sure that both
Adjustment Pins (4) are fully inserted at the
same height.
4
29
35
36
4
Apply lubricant here
Apply lubricant here