Filter
Top Products
DIAGRAM OF THE CONSOLE
Monitor Display
Water Bottle
Holder
(Water bottle
is not included)
Speed Control
STEP BY STEP CONSOLE OPERATION
Before the console can be operated, two "AA"
batteries must be installed (see assembly step 6 on
page 6). Follow the steps below to operate the console.
Step onto the grip tape on the treadmill. Find the clip
attached to the key (see the drawing above), and slide
the clip onto the waistband of your clothing.
Follow the steps at the right and on page 9 to operate
the console.
;1
Note: Inserting the key
will not turn on the dis-
play. The display will
turn on when the
ON/RESET button is
pressed or when the
walking belt is started.
(If you just installed
Insert the key fully into the power switch.
©
batteries, the display will already be on.)