Filter
Top Products
85
6
6. Press the Book Rack (85) onto the Console Base (100) in
the location shown.
100
5. Open part bag D. Place the Console Base (100) on the
Right Handrail (6) and the Left Handrail (not shown).
Attach the Console Base with four 3/4” Screws (90) (only
two Screws are shown). Do not tighten the Screws yet.
Insert the Wire Harness (22) through the two indicated
plastic ties on the Console Base (100). Next, insert the
Wire Harness up through the opening beside the Wire
Cover (86). Make sure that the Wire Cover is securely at-
tached to the Console Base.
See drawing 5a. Look at the top of the Console Base
(100). Insert the Wire Harness (22) through the plastic tie
on top of the Console Base.
5
8
100
86
Ties
6
22
Tie
100
90
22
75
22
4
69
69
7
6
87
Small Bracket
Small Bracket
4. See the inset drawings and identify the two Crossbar
Screws (69); be careful not to confuse the Crossbar
Screws with the 3/4” Screws (90).
Hold the Crossbar (75) on the small brackets on the
Handrails (6, 7). Attach the Crossbar to the small brack
-
ets with the two Crossbar Screws (69). Do not tighten
the Crossbar Screws yet.
Attach the end of the ground wire to the small hole in the
side of the Right Handrail (6) with a Silver Ground Screw
(87).
69
90
5a