Filter
Top Products
9
8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking
belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.
7. Attach the Latch Bracket (77) to the Left Upright (9) as
shown with two 3/4” Screws (70).
Remove the knob from the pin. Make sure that the collar
a
nd the spring are on the pin as shown. Insert the pin
into the Latch Bracket (77), and tighten the knob back
onto the pin.
9
Knob
Pin
Collar
Spring
77
70
70
7
Large
Hole