Weslo 85 Treadmill User Manual


 
9
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with PERFORMANT LUBE
TM
, a high-performance lubricant. IMPOR-
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and an
earthing plug.
Important: If the power cord is damaged, it must
be replaced with a manufacturer-recommended power cord.
See drawing 1. Plug the indicated end of the power cord into the
socket on the treadmill. Lift the tab on the ferrite box and clamp the
ferrite box around the power cord. Fasten the included plastic tie just
behind the ferrite box and cut off the excess plastic tie. The plastic tie
will prevent the ferrite box from sliding along the power cord.
See drawing 2. Press the pins on the power cord into the metal clips
in the adaptor as shown. Close the adaptor cover over the end of the
power cord and tighten the screw in the adaptor.
Important: Make
sure that the adaptor cover is secure and the screw has been
tightened before using the power cord.
See drawing 3. Plug the power cord into an appropriate outlet that is
properly installed and earthed in accordance with all local codes and
ordinances. Important: The treadmill is not compatible with
GFCI-equipped outlets.
DANGER: Improper connection of the equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
Socket on treadmill
Metal
Clips
1
2
Ferrite Box
Tab
Plastic Tie
Pins
Screw
Adaptor
Outlet
3
Adaptor
Cover
OPERATION AND ADJUSTMENT