Filter
Top Products
MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the stepper
regularly. To clean the stepper, use a damp cloth and
a small amount of mild detergent. Never use abra-
sives or solvents; keep liquid away from the console.
HOW TO REPLACE THE BAI-I'ERY
If the console does not function properly, or ifthe dis-
play becomes faint, the battery should be replaced.
See assembly step 5 on page 5.
HOW TO ADJUST THE REED SWITCH
If the console still does not function properly, the
Reed Switch (34) should be adjusted. Hold down the
Left Pedal Leg (40) so that the Magnet (35) is level
with the Reed Switch. Loosen the M5 x 10mm Self-
tapping Screw (13). Slide the Reed Switch (34) in or
out slightly. The gap between the Reed Switch and
the Magnet should be about 1/8". Make sure that the
Magnet will not hit the Reed Switch when the Left
Pedal Leg is moved. Repeat until the console displays
correct feedback. Then, retighten the Screw (13).
7